settings=Settings
advancedSettings=Advanced Settings
default=Default
enabled=Enabled
enable=Enable
disabled=Disabled
error=Error
ok=OK
yes=Yes
no=No
reset=Reset
factory-reset=Factory Reset
delete=Delete
cancel=Cancel
close=Close
back=Back
continue=Continue
skip=Skip
pair=Pair
add=Add
done=Done
set=Set
notNow=Not now
turnOn=Turn ON
selectASIMCard=Select a SIM card
sim1=SIM 1
sim2=SIM 2
unavailable=Not available
confirmation=Confirmation
simSettingsWithIndex = SIM {{index}} Settings
simWithIndex = SIM {{index}}
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Connectivity
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
networkAndConnectivity=Network & Connectivity
airplaneMode=Airplane Mode
airplaneMode.ariaLabel=Airplane Mode
geolocation=Geolocation
geolocation.ariaLabel=Geolocation
# Connectivity :: Wi-Fi
wifi=Wi-Fi
# LOCALIZATION NOTE (wifi-header): if you leave the original
# en-US value "{{wifi}}" in the following string, the localization
# will be automatically picked from the existing string with ID "wifi".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
wifi-header={{wifi}}
wifi-disabled=Turn Wi-Fi on to view available networks.
availableNetworks=Available Networks
knownNetworks=Known Networks
hiddenNetworks=Hidden Networks
scanning=Searching…
scanNetworks=Search Again
full-status-initializing = Initializing…
full-status-connecting = Connecting to {{ssid}}…
full-status-associated = Obtaining an IP address…
full-status-connected = Connected to {{ssid}}
full-status-connectingfailed = Connection failed
full-status-disconnected = Not connected
short-status-connecting = Connecting…
short-status-associated = Obtaining an IP address…
short-status-connected = Connected
short-status-connectingfailed = Connection failed
short-status-disconnected = Not connected
wifi-sleep=Wi-Fi Sleep
wifi-sleep-description=Enable to automatically turn off Wi-Fi during sleep to save battery power.
manageNetworks=Manage Networks
wifi-bad-credentials-title=Failed connecting to Wi-Fi
wifi-bad-credentials-confirm=Unable to connect to {{ssid}}, authentication failed due to bad credentials. Please re-enter the network password.
# LOCALIZATION NOTE (manageNetworks-header): if you leave the original
# en-US value "{{manageNetworks}}" in the following string, the localization
# will be automatically picked from the existing string with ID "manageNetworks".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
manageNetworks-header={{manageNetworks}}
manageCertificates=Manage Certificates
# LOCALIZATION NOTE (manageCertificates-header): if you leave the original
# en-US value "{{manageCertificates}}" in the following string, the localization
# will be automatically picked from the existing string with ID
# "manageCertificates".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
manageCertificates-header={{manageCertificates}}
joinHiddenNetwork=Join Hidden Network
securedBy=Secured by {{capabilities}}
security = Security
securityNone = None
securityOpen = Open
notInRange = Not in range
ipAddress=IP address
linkSpeed=Link speed
linkSpeedMbs={{linkSpeed}} Mbit/s
signalStrength = Signal strength
signalLevel0 = Very weak
signalLevel1 = Weak
signalLevel2 = Average
signalLevel3 = Good
signalLevel4 = Very good
forget=Forget
forgetNetwork-dialog=Forget network?
forgetNetwork-confirmation=Confirmation
authentication=Authentication
# LOCALIZATION NOTE (authentication-header): if you leave the original
# en-US value "{{authentication}}" in the following string, the localization
# will be automatically picked from the existing string with ID "authentication".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
authentication-header={{authentication}}
eap=EAP method
auth-phase2=Phase 2 authentication
server-certificate=Server certificate
import-certificate-msg=Notice: If you need to import new certificates, please go to "Manage certificates".
identity=Identifier
password=Password
showPassword=Show password
networkNotification=Network notification
networkNotification-expl=Notify me when an open network is available
macAddress=MAC Address
# os = OS version. For example: 2.0.
# The whole string may look like this: "Firefox OS 2.0"
deviceInfo_software = {{brandShortName}} {{os}}
macUnavailable=Not available
noNetworksFound=No networks found
noKnownNetworks=No known networks
edit=Edit
certificateList=Certificate List
noImportedCertificates=No certificates imported
deleteCertificate=Delete Certificate
importCertificate=Import Certificate
selectCertificateFile=Select Certificate File
enterCertificateNickname=Enter certificate nick name
nickname=Nick name
enter-certificate-name-msg=You can change the nick name or keep the default name.
certificate-deletion-failed=Certificate deletion failed
certificate-deletion-failed-description=This may be due to a storage issue, for example.
certificate-import-failed=Certificate import failed
certificate-import-failed-description=This may be due to a damaged certificate file, for example.
# Connectivity :: Wi-Fi :: WPS (Wi-Fi Protected Setup)
wpsMessage=Connect with WPS
# LOCALIZATION NOTE (wpsMessage-header): if you leave the original
# en-US value "{{wpsMessage}}" in the following string, the localization
# will be automatically picked from the existing string with ID "wpsMessage".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
wpsMessage-header={{wpsMessage}}
fullStatus-wps-inprogress = WPS is in progress…
fullStatus-wps-canceled = WPS was canceled
fullStatus-wps-timedout = WPS timed out
fullStatus-wps-failed-error = WPS failed [{{error}}]
fullStatus-wps-overlapped = Another WPS PBC AP was found
wpsDescription2=Automatic Wi-Fi setup
wpsMethodSelection=Select a WPS Method:
wpsPbcLabel=Button connection
wpsMyPinLabel=My PIN connection
wpsApPinLabel=AP PIN connection
wpsPinDescription=PIN is 4 or 8 digits
wpsPinInput=Input {{pin}} to an opposite device
wpsPinAps=Select an opposite device
wpsAnyAp=Any
wpsCancelMessage=Cancel WPS
wpsCancelFailedMessageError=Failed to cancel WPS [{{error}}]
# Connectivity :: Call
callSettings=Call Settings
# LOCALIZATION NOTE (callSettings-header): if you leave the original
# en-US value "{{callSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "callSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
callSettings-header={{callSettings}}
callSettingsQuery=Requesting network info…
callSettingsQueryError=Error in query
voiceMail=Voicemail
# LOCALIZATION NOTE (voiceMail-header): if you leave the original
# en-US value "{{voiceMail}}" in the following string, the localization
# will be automatically picked from the existing string with ID "voiceMail".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
voiceMail-header={{voiceMail}}
voiceMail-number=Voicemail Number
voiceMail-number-notSet=Not set
voicePrivacyMode=Voice Privacy Mode
callWaiting=Call Waiting
confirmCallWaitingTitle=Unable to confirm call waiting preferences
confirmCallWaitingDesc=The device is currently unable to communicate with the carrier. Try setting the preference again.
callForwarding=Call Forwarding
# LOCALIZATION NOTE (callForwarding-header): if you leave the original
# en-US value "{{callForwarding}}" in the following string, the localization
# will be automatically picked from the existing string with ID "callForwarding".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
callForwarding-header={{callForwarding}}
callForwardingForward=Forward
callForwardingUnconditional=Always Forward
callForwardingUnconditionalShort=Always
callForwardingMobileBusy=Forward When Busy
callForwardingMobileBusyShort=When busy
callForwardingNoReply=Forward When Unanswered
callForwardingNoReplyShort=When unanswered
callForwardingNotReachable=Forward When Unreachable
callForwardingNotReachableShort=When unreachable
callForwardingForwardingVoiceToNumber=Voice calls to {{number}}
callForwardingNotForwarding=Disabled
callForwardingConfirmTitle=Call forwarding confirmation message
cf-alwaysUseThisNumber=Always use this number
cf-numberWhenUnreachable=Number when unreachable
cf-numberWhenUnanswered=Number when unanswered
cf-numberWhenBusy=Number when busy
callForwardingInvalidNumberError=This phone number is invalid.
callForwardingSetSuccess=Operation successfully set.
callForwardingSetForbidden=Your operator does not support that operation.
callForwardingSetError=Call settings error.
callerId=Caller ID
callBarring=Call Barring
# LOCALIZATION NOTE (callBarring-header): if you leave the original
# en-US value "{{callBarring}}" in the following string, the localization
# will be automatically picked from the existing string with ID "callBarring".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
callBarring-header={{callBarring}}
callBarring-outgoing=Outgoing Calls
callBarring-baoc=All
callBarring-boic=International
callBarring-boicExhc=International Except Home Country
callBarring-incoming=Incoming Calls
callBarring-baic=All
callBarring-baicR=All While Roaming
callBarring-passcode=Passcode
callBarring-change-passcode=Change passcode
callBarring-passcode-enter=Enter passcode
callBarring-passcode-unknown=In case you don't know your passcode, please contact your carrier
callBarring-current-passcode=Current passcode
callBarring-new-passcode=New passcode
callBarring-create-passcode=Create a Passcode
callBarring-confirm-passcode=Confirm passcode
callBarring-passcode-error-generic=Passcode error.
callBarring-passcode-error-incorrect=Passcode is incorrect.
callBarring-passcode-error-mismatch=Passcode doesn’t match.
callBarring-update-item-error=Error while updating the item: {{error}}.
callBarring-update-generic-error=Network or passcode error
callBarring-change-passcode-success=Passcode changed.
callerId-default=Network default
callerId-hide=Hide number
callerId-show=Show number
fdn=Fixed dialing numbers
fdnSettings=Fixed Dialing Numbers
# LOCALIZATION NOTE (fdnSettings-header): if you leave the original
# en-US value "{{fdnSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "fdnSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
fdnSettings-header={{fdnSettings}}
fdn-authorizedNumbers=Authorized Numbers
# LOCALIZATION NOTE (fdn-authorizedNumbers-header): if you leave the original
# en-US value "{{fdn-authorizedNumbers}}" in the following string, the localization
# will be automatically picked from the existing string with ID "fdn-authorizedNumbers".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
fdn-authorizedNumbers-header={{fdn-authorizedNumbers}}
fdn-authorizedNumbers-desc=List of numbers that can be called
fdn-explanation1=Restrict which numbers can be dialed from this phone.
fdn-explanation2=(Emergency numbers will always be dialable)
fdnEnable=Enable FDN
fdnDisable=Disable FDN
fdnReset=Reset PIN2
fdnAttemptMsg3={[ plural(n) ]}
fdnAttemptMsg3[one]=You have one try left to enter the correct code before locking the SIM card.
fdnAttemptMsg3[two]=You have {{n}} tries left to enter the correct code before locking the SIM card.
fdnAttemptMsg3[few]=You have {{n}} tries left to enter the correct code before locking the SIM card.
fdnAttemptMsg3[many]=You have {{n}} tries left to enter the correct code before locking the SIM card.
fdnAttemptMsg3[other]=You have {{n}} tries left to enter the correct code before locking the SIM card.
fdnLastChanceMsg=This is your last chance to enter the correct PIN2. Otherwise, you must enter the PUK2 code to use this SIM card.
fdnErrorMsg=The PIN2 code is incorrect.
fdnContact-name=name
fdnContact-number=number
fdnContact-submit=submit
fdnAction-add=Add contact
fdnAction-call=Call
fdnAction-edit=Edit contact
fdnAction-edit-header=Edit contact
fdnAction-delete=Delete contact
fdnNoFDNFreeRecord=Maximum FDN reached. You cannot add more numbers.
# Connectivity :: Messaging
messagingSettings=Messaging Settings
# LOCALIZATION NOTE (messagingSettings-header): if you leave the original
# en-US value "{{messagingSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "messagingSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
messagingSettings-header={{messagingSettings}}
message-confirmation = Message Confirmation
message-delivery-reports = Delivery Reports
message-delivery-reports-details = Request notification of delivery for each message sent
message-read-reports = Read Reports
message-read-reports-details = Request read report for each message sent
mmsTitle= Multimedia Messaging (MMS)
auto-retrieve = Auto Retrieve
auto-retrieve-details = Automatically retrieve messages
manual-retrieve = Off
auto-roaming-retrieve = On with roaming
auto-no-roaming-retrieve = On without roaming
autoConfigure=Auto-configure
wapPushMessages= WAP Push Messages
wapPush=WAP Push
cellBroadcastMessages=Cell Broadcast Messages
cellBroadcast=Cell Broadcast
emergencyAlert=Emergency Alert
messagingInformation = Information
# LOCALIZATION NOTE (messagingSMSC): SMSC stands for Short Message Service Center
messaging-SMSC = Service Center
messaging-sim-settings = SIM {{index}} Settings
unknown-SMSC = Info not available
# Connectivity :: Cellular & Data
cellularAndData=Cellular & Data
# LOCALIZATION NOTE (cellularAndData-header): if you leave the original
# en-US value "{{cellularAndData}}" in the following string, the localization
# will be automatically picked from the existing string with ID "cellularAndData".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
cellularAndData-header={{cellularAndData}}
dataOperator=Operator
dataConnectivity=Data
dataConnection=Data Connection
dataRoaming=Data Roaming
netOperator=Operator
# LOCALIZATION NOTE (netOperator-header): if you leave the original
# en-US value "{{netOperator}}" in the following string, the localization
# will be automatically picked from the existing string with ID "netOperator".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
netOperator-header={{netOperator}}
availableOp=Operators in the Area
preferredNetworkTypeAlertTitle = Preferred network type
preferredNetworkTypeAlertErrorMessage = Network type could not be set
operator-networkType=Network Type
operator-networkType-auto=Automatic
operator-networkType-prefer3G=3G preferred
operator-networkType-2G=2G only
operator-networkType-3G=3G only
# MULTISTACK
operator-networkType-GSM=GSM
operator-networkType-WCDMA=WCDMA
operator-networkType-CDMA=CDMA
operator-networkType-EVDO=EVDO
operator-networkType-LTE=LTE
operator-networkType-preferWCDMA=WCDMA preferred
operator-networkType-auto-2G-3G=Auto (2G/3G)
operator-networkType-auto-3G-4G=Auto (3G/4G)
operator-networkType-auto-CDMA-EVDO=Auto (CDMA/EVDO)
operator-networkType-auto-WCDMA-GSM=Auto (WCDMA/GSM)
operator-networkType-auto-LTE-WCDMA-GSM=Auto (LTE/WCDMA/GSM)
operator-networkType-auto-LTE-WCDMA=Auto (LTE/WCDMA)
operator-networkType-auto-LTE-CDMA-EVDO=Auto (LTE/CDMA/EVDO)
operator-networkType-auto-WCDMA-GSM-CDMA-EVDO=Auto (WCDMA/GSM/CDMA/EVDO)
operator-autoSelect=Automatic Selection
operator-networkSelect-auto=Automatic
operator-networkSelect-manual=Manual
operator-turnAutoSelectionOff=Turn automatic selection off to view available operators.
operator-info-connecting = Connecting…
operator-info-failed = Connection failed
operator-info-connected = Connected
operator-info-available = Available
operator-info-current = Connected
operator-info-forbidden = Forbidden
operator-info-unknown = Unknown state
operator-roamingPreference=Roaming preference
operator-roamingPreference-home=Home
operator-roamingPreference-any=Any
operator-roamingPreference-affiliated=Affiliated
apn=APN
apnSettings = APN Settings
# LOCALIZATION NOTE (apnSettings-header): if you leave the original
# en-US value "{{apnSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "apnSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
apnSettings-header = {{apnSettings}}
dataSettings = Data Settings
# LOCALIZATION NOTE (dataSettings-header): if you leave the original
# en-US value "{{dataSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "dataSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
dataSettings-header = {{dataSettings}}
suplSettings = A-GPS Settings
# LOCALIZATION NOTE (suplSettings-header): if you leave the original
# en-US value "{{suplSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "suplSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
suplSettings-header = {{suplSettings}}
messageSettings = Message Settings
# LOCALIZATION NOTE (messageSettings-header): if you leave the original
# en-US value "{{messageSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "messageSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
messageSettings-header = {{messageSettings}}
dunSettings = Tethering Settings
# LOCALIZATION NOTE (dunSettings-header): if you leave the original
# en-US value "{{dunSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "dunSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
dunSettings-header = {{dunSettings}}
imsSettings = IMS Settings
# LOCALIZATION NOTE (imsSettings-header): if you leave the original
# en-US value "{{imsSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "imsSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
imsSettings-header2 = {{imsSettings}}
fotaSettings = FOTA Settings
# LOCALIZATION NOTE (fotaSettings-header): if you leave the original
# en-US value "{{fotaSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "fotaSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
fotaSettings-header = {{fotaSettings}}
apn-editor-header = APN Editor
mmsport = MMS port
mmsproxy = MMS proxy
mmsc = MMSC
httpProxyHost=HTTP proxy host
httpProxyPort=HTTP proxy port
custom=(custom settings)
apn-authType=Authentication
apn-authType-notDefined = Not defined
apn-authType-none = None
apn-authType-pap = PAP
apn-authType-chap = CHAP
apn-authType-papOrChap = PAP or CHAP
apn-protocol = Protocol
apn-roaming-protocol = Roaming Protocol
apn-protocol-notDefined = Not defined
apn-protocol-ip = IPv4
apn-protocol-ipv6 = IPv6
apn-protocol-ipv4v6 = IPv4/IPv6
apn-type = APN Type
apn-mtu = MTU
dataConnection-warning-head=Turn ON data connection?
dataConnection-warning-message=Applications will automatically fetch data via data connection when required. Additional data charges may apply.
dataConnection-warning-message-short=Automatically fetch mobile network data.
dataRoaming-warning-head=Turn ON data roaming?
dataRoaming-warning-message=Depending on your service agreement, extra charges may apply for data when you are in a roaming area.
dataRoaming-warning-message-short=Fetch data when roaming.
change-apn-warning-message1=Depending on your service agreement, changing your APN setting may result in extra charges when roaming. Do you want to proceed?
reset-apn-warning-title=Reset to Default
reset-apn-warning-message=This resets the settings to default values. This cannot be undone.
state-unknown = Unknown state
state-available = Available
state-connected = Connected
state-current = Connected
state-forbidden = Forbidden
delete-apn-confirm = Delete this APN?
delete-apn = Delete
add-apn = Add New APN
reset-apn = Reset to Default
apnSettings-reset = APN settings reset
# Connectivity :: Bluetooth
bluetooth = Bluetooth
# LOCALIZATION NOTE (bluetooth-header): if you leave the original
# en-US value "{{bluetooth}}" in the following string, the localization
# will be automatically picked from the existing string with ID "bluetooth".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
bluetooth-header = {{bluetooth}}
bluetooth-enable-msg = Turn Bluetooth on to view devices in the area.
bluetooth-paired-devices = Paired devices
bluetooth-devices-in-area = Devices in the Area
bluetooth-visible-to-all = Visible to All
bluetooth-name-maxlength-alert = Your device name exceeds {{length}} characters. Please retry again.
bluetooth-address = Bluetooth Address
bluetooth-address-unavailable = Not available
bt-status-nopaired = No devices paired
bt-status-turnoff = Turned off
bt-status-paired = {[ plural(n) ]}
bt-status-paired[zero] = {{name}}
bt-status-paired[one] = {{name}}, +{{n}} more
bt-status-paired[two] = {{name}}, +{{n}} more
bt-status-paired[few] = {{name}}, +{{n}} more
bt-status-paired[many] = {{name}}, +{{n}} more
bt-status-paired[other] = {{name}}, +{{n}} more
device-status-tap-connect = Tap to connect
device-status-pairing = Pairing with device…
device-status-waiting = Waiting for other device…
device-status-paired = Paired
device-status-connecting = Connecting…
device-status-connected = Connected
device-status-connected-media = Connected to media audio
device-option-unpair = Unpair
device-option-confirm = Confirm
device-option-unpair-confirmation = Confirmation
device-option-unpair-device = Unpair device?
device-option-connect = Connect
device-option-disconnect = Disconnect
search-for-device = Searching for devices…
search-device = Search for devices
rename-device = Rename my device
unnamed-device = Unknown device
change-btdevice-name = Change device name
change-btdevice-name-desc = This name will appear on your other Bluetooth devices
bluetooth-new-name = New name
error-pair-title = Unable to pair devices
error-pair-pincode = Unable to pair with the device. Check that the PIN is correct.
error-pair-toofast = Unable to pair with the device. Too many requests.
error-connect-title = Unable to connect devices
error-connect-msg = Check that the device you’re trying to connect with is still in range and has Bluetooth turned on.
unpair-title = Unpair a connected device?
unpair-msg = You are currently connected to this device. Unpairing will also disconnect from it.
unpair-confirm = {{unpair-title}}\n{{unpair-msg}}
# Connectivity :: NFC
nfc = NFC
nfc.ariaLabel = NFC
# Connectivity :: Internet Sharing
internetSharing=Internet Sharing
# LOCALIZATION NOTE (internetSharing-header): if you leave the original
# en-US value "{{internetSharing}}" in the following string, the localization
# will be automatically picked from the existing string with ID "internetSharing".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
internetSharing-header={{internetSharing}}
internetSharing-usb=USB
internetSharing-wifi=Wi-Fi
wifi-hotspot=Wi-Fi Hotspot
wifi-hotspot-enabled-msg=Hotspot "{{hotspotSSID}}" is enabled
wifi-password=Password
wifi-security=Security
usb-tethering=USB Tethering
hotspotSettings=Hotspot Settings
wifi-auth-username=Username
wifi-auth-password=Password
wifi-join-username=Username
wifi-join-password=Password
# LOCALIZATION NOTE (hotspotSettings-header): if you leave the original
# en-US value "{{hotspotSettings}}" in the following string, the localization
# will be automatically picked from the existing string with ID "hotspotSettings".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
hotspotSettings-header={{hotspotSettings}}
ssid-name=SSID Network Name
hotspot-security-open=open
# LOCALIZATION NOTE
#
# [For localizers]
# We can't render these strings correctly for RTL locales, so we have to put LRE ()
# and PDF () entities to these translations to force the correct direction.
#
# RTL locales should have a translation similar to this:
# hotspot-wpa-psk= WPA (TKIP)
# hotspot-wpa2-psk= WPA2 (AES)
#
# [More details]
#
# Please check settings.ar.properties to see the difference first.
#
# We have to put "" and "" these two RTL related characters
# in Arabic locales to make sure these two strings would not be translated
# automatically in a wrong way by browser. Because from engineering side,
# we can only change settings.ar.properties, for localizers, please remember to
# put them in the other RTL languages.
hotspot-security-wpa-psk=WPA
hotspot-security-wpa2-psk=WPA2
hotspot-password-desc=The password must have at least 8 characters.
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Personalization
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
personalization=Personalization
# Personalization :: Sound
sound=Sound
sound.ariaLabel=Sound
# LOCALIZATION NOTE (sound-header): if you leave the original
# en-US value "{{sound}}" in the following string, the localization
# will be automatically picked from the existing string with ID "sound".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
sound-header={{sound}}
volume=Volume
tones=Tones
touch-tones=Audible touch tones
touch-tone-short=Short
touch-tone-long=Long
select-tone=Select a tone
ringtones=Ringtones
alerts=Alerts
manage-tones=Manage Tones
other-sounds=Other Sounds
unlock-screen=Unlock screen
camera=Camera
sent-message=Sent Message
alarm-sound=Alarm
ringtone-and-notification-sound=Ringtones & Notifications
media-sound=Media
saving-tone=Saving…
no-ringtone-app=We were unable to find a ringtone app to manage ringtones!
# Personalization :: Display
display=Display
display.ariaLabel=Display
# LOCALIZATION NOTE (display-header): if you leave the original
# en-US value "{{display}}" in the following string, the localization
# will be automatically picked from the existing string with ID "display".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
display-header={{display}}
brightness=Brightness
brightness-autoAdjust=Adjust Automatically
lockScreen=Lock Screen
wallpaper=Wallpaper
screen-timeout=Screen Timeout
one-minute = 1 minute
two-minutes = 2 minutes
five-minutes = 5 minutes
ten-minutes = 10 minutes
screen-timeout-never=never
lock-orientation=Lock Orientation
# Personalization :: Navigation
navigation=Navigation
navigation.ariaLabel=Navigation
# LOCALIZATION NOTE (navigation-header): if you leave the original
# en-US value "{{navigation}}" in the following string, the localization
# will be automatically picked from the existing string with ID "navigation".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
navigation-header={{navigation}}
edge-swipe-navigation=Edge Swipe Navigation
edge-swipe-navigation-enable-msg=Drag from the left or right edge of the screen to jump between apps.
# Personalization :: Notifications
notifications=Notifications
notifications.ariaLabel=Notifications
# LOCALIZATION NOTE (notifications-header): if you leave the original
# en-US value "{{notifications}}" in the following string, the localization
# will be automatically picked from the existing string with ID "notifications".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
notifications-header={{notifications}}
lockscreen-notifications=Show on Lock Screen
notifications-resend=Show After Reboot
# Personalization :: Date & Time
dateAndTime=Date & Time
# LOCALIZATION NOTE (dateAndTime-header): if you leave the original
# en-US value "{{dateAndTime}}" in the following string, the localization
# will be automatically picked from the existing string with ID "dateAndTime".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
dateAndTime-header={{dateAndTime}}
setTimeAutomatically=Set Automatically
timezoneMessage=Time Zone
dateMessage=Date
timeMessage=Time
selectTimezoneContinent=Select continent
selectTimezone=Select time zone
time-format=Format
time-format-time=Time Format
useDefaultTimeFormat=Use Default
hour-12 = 12-hour
hour-24 = 24-hour
# Personalization :: Language & Region
languageAndRegion=Language & Region
language=Language
# LOCALIZATION NOTE (language-header): if you leave the original
# en-US value "{{language}}" in the following string, the localization
# will be automatically picked from the existing string with ID "language".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
language-header={{language}}
region=Region
more-languages=Get More Languages
sample-format=Sample Format
# see http://www.cplusplus.com/reference/clibrary/ctime/strftime/
longDateFormat=%A, %B %d, %Y
# LOCALIZATION NOTE (shortDateFormat):
# shortDateFormat should be the value of longDateFormat without the day string
shortDateFormat=%B %d, %Y
# Personalization :: Sim cards manager
simManager=SIM Manager
# LOCALIZATION NOTE (simManager-header): if you leave the original
# en-US value "{{simManager}}" in the following string, the localization
# will be automatically picked from the existing string with ID "simManager".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
simManager-header={{simManager}}
simSettings=SIM Settings
sim-manager-outgoing-calls=Outgoing Calls
sim-manager-outgoing-call-desc=Calls will be sent from
sim-manager-outgoing-messages=Outgoing Messages
sim-manager-outgoing-messages-desc=SMS will be sent from
sim-manager-outgoing-data=Data
sim-manager-outgoing-data-description=Data service network and Marketplace payments
sim-manager-always-ask=Always ask
sim-pin-locked=SIM PIN locked
no-operator=No operator
cant-disable-simcard-alert=At least one SIM should be activated at a time
disable-simcard-confirm=SIM {{disableCardIndex}} can’t receive any calls and messages. Outgoing calls and outgoing messages which are set to SIM {{disableCardIndex}} will be disabled.
change-outgoing-data-confirm=The current data transfer will be suspended. Continue anyway?
# Personalization :: Home Screens
home-screens=Home Screens
home-screens.ariaLabel=Home Screens
homescreen-layout=Layout
homescreen-icon-layout=Icon Layout
homescreen-three-columns=Three Columns
homescreen-four-columns=Four Columns
notice=Notice
search=Search
search.ariaLabel=Search
search-header=Search
search-engine=Search Engine
search-suggestions=Search Suggestions
search-suggestions-description=The characters you type when entering a search are sent to multiple search providers and will be used to send you search suggestions. Additional data charges may apply when using this feature.
replaceable-home-screen=Replaceable Home Screen
# Personalization :: Home Screens :: Home Screens List
change-home-screen=Change Home Screen
get-more-home-screens=Get More Home Screens
my-home-screens=My Home Screens
# Personalization :: Home Screens :: Home Screens List :: Home Screen Details
home-screen-description=Description
delete-home-screen-button=Delete Home Screen
# Personalization :: Keyboard
keyboardSettings=Keyboard Settings
selectedKeyboards=Selected Keyboards
keyboards=Keyboards
# LOCALIZATION NOTE (keyboards-header): if you leave the original
# en-US value "{{keyboards}}" in the following string, the localization
# will be automatically picked from the existing string with ID "keyboards".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
keyboards-header={{keyboards}}
numberKeyboardLayouts=Number layouts
optionKeyboardLayouts=Option layouts
keypad=Keypad
dialpad=Dial Pad
selectKeyboards=Select Keyboards
# LOCALIZATION NOTE (selectKeyboards-header): if you leave the original
# en-US value "{{selectKeyboards}}" in the following string, the localization
# will be automatically picked from the existing string with ID "selectKeyboards".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
selectKeyboards-header={{selectKeyboards}}
mustHaveOneKeyboard=At least one {{type}} keyboard should be selected
keyboardType-text=text
keyboardType-url=url
keyboardType-number=number
defaultKeyboardEnabled={{appName}} {{layoutName}} is set as default input method
# LOCALIZATION NOTE (layout-emoji): Label for the layout "Emoji".
# other layouts are always labeled in their own native scripts (in JS files)
keyboard-layout-emoji=Emoji
# Personalization :: Themes
themes=Themes
themes.ariaLabel=Themes
themes-header={{themes}}
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Accounts
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
fxa=Firefox Accounts
accounts=Account Management
fxa-accounts=Firefox Accounts
# LOCALIZATION NOTE (fxa-accounts-header): if you leave the original
# en-US value "{{fxa-accounts}}" in the following string, the localization
# will be automatically picked from the existing string with ID "fxa-accounts".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
fxa-accounts-header={{fxa-accounts}}
# Panel: logged out
fxa-overview=Your Firefox Account lets you use features like Find My Device and apps like the Firefox Marketplace.
fxa-invitation=Create Account or Sign In
# Panel: logged in, unverified
fxa-confirm-account=Confirm Your Account
fxa-verification-email-sent-msg=We will send an email to: {{email}}
fxa-please-verify=Click the verification link in your email to confirm your account.
fxa-cancel-confirmation=Cancel Account Confirmation
fxa-resend-alert=A verification link has been sent to {{email}}.
fxa-dont-see-email-resend=Don’t see an email? Resend.
# Panel: logged in, verified
fxa-about=About
fxa-logged-in-text=Signed in as {{email}}
fxa-options=Options
fxa-sign-out=Sign Out
# Additional menu states
fxa-confirm-email=Please confirm {{email}}
findmydevice=Find My Device
findmydevice-create-account=Create account or sign in
findmydevice-enable=Enable Find My Device
findmydevice-about=About Find My Device
findmydevice-enable-geolocation-prompt=Enable Geolocation?
findmydevice-enable-geolocation-description=To view your device's location, you must enable geolocation tracking.
findmydevice-geolocation-enabled=Geolocation Enabled
# Error messages
# Reusing the setup-error-offline message from the email app
findmydevice-enable-network=This device is currently offline. Connect to a network and try again.
findmydevice-error=A Find My Device error has occurred.
findmydevice-please-try=Please try again.
findmydevice-please-tap=Please tap to try again.
# Firefox Sync
fxsync-overview=Sign in to sync your history, passwords & more
fxsync-get-started=Get started
fxsync-sync-user=Firefox Account
fxsync-disable=Disable Firefox Sync
fxsync-last-synced=Last synced {{when}}
fxsync-collections=Collections
fxsync-legal=Legal
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Security
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
privacyAndSecurity=Privacy & Security
passcode-lock=Passcode Lock
passcode-lock-desc=Passcode: {{code}}
screenLock=Screen Lock
# LOCALIZATION NOTE (screenLock-header): if you leave the original
# en-US value "{{screenLock}}" in the following string, the localization
# will be automatically picked from the existing string with ID "screenLock".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
screenLock-header={{screenLock}}
screenLock-enabled-with-no-passcode=Enabled with no passcode
screenLock-enabled-with-passcode=Enabled with passcode
simSecurity=SIM Security
# LOCALIZATION NOTE (simSecurity-header): if you leave the original
# en-US value "{{simSecurity}}" in the following string, the localization
# will be automatically picked from the existing string with ID "simSecurity".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
simSecurity-header={{simSecurity}}
# Security :: App permissions
appPermissions=App Permissions
appPermissions.ariaLabel=App Permissions
# LOCALIZATION NOTE (appPermissions-header): if you leave the original
# en-US value "{{appPermissions}}" in the following string, the localization
# will be automatically picked from the existing string with ID "appPermissions".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
appPermissions-header={{appPermissions}}
author=Author
permissions=Permissions
revoke=Revoke
ask=Ask
block=Block
allow2=Allow
uninstallApp=Uninstall App
# Security :: Phone Lock
phone=Phone
messages=Messages
vibrate=Vibrate
ring=Ring
change=Change
create=Create
create-a-passcode=Create a Passcode
passcode=Passcode
passcode-heading=Passcode
enter-passcode=Enter passcode
new-passcode=New passcode
current-passcode=Current passcode
incorrect-passcode=Passcode is incorrect
passcode-doesnt-match=Passcode doesn’t match. Try again.
confirm-passcode=Confirm Passcode
immediately=Immediately
after-one-minute=After 1 minute
after-five-minutes=After 5 minutes
after-fifteen-minutes=After 15 minutes
after-thirty-minutes=After 30 minutes
after-one-hour=After 1 hour
require-passcode=Require passcode
change-passcode=Change passcode
# Security :: SIM PIN Lock
noSimCard=No SIM card
simPin=SIM PIN
simPin2=SIM PIN2
simPinWithIndex=SIM {{index}} PIN
pukCode=PUK code
puk2Code=PUK2 code
whatIsSimPin=What is a SIM PIN?
simPinIntro1=A SIM PIN prevents access to the SIM card cellular data networks. When it’s enabled, any device containing the SIM card will request the PIN upon restart.
simPinIntro2=A SIM PIN is not the same as the passcode used to unlock the device.
changeSimPin=Change PIN
simPinChangedSuccessfully=SIM PIN changed successfully
simPinChangedSuccessfullyWithIndex=SIM {{index}} PIN changed successfully
pinTitle=Enter SIM PIN
pin2Title=Enter SIM PIN2
pukTitle=Enter PUK code
puk2Title=Enter PUK2 code
newpinTitle=New PIN
pinErrorMsg=The PIN was incorrect.
inputCodeRetriesLeft={[ plural(n) ]}
inputCodeRetriesLeft[one]=Last try.
inputCodeRetriesLeft[two]={{n}} tries left.
inputCodeRetriesLeft[few]={{n}} tries left.
inputCodeRetriesLeft[many]={{n}} tries left.
inputCodeRetriesLeft[other]={{n}} tries left.
pinAttemptMsg3={[ plural(n) ]}
pinAttemptMsg3[one]=You have one try left to enter the correct code before locking the SIM card.
pinAttemptMsg3[two]=You have {{n}} tries left to enter the correct code before locking the SIM card.
pinAttemptMsg3[few]=You have {{n}} tries left to enter the correct code before locking the SIM card.
pinAttemptMsg3[many]=You have {{n}} tries left to enter the correct code before locking the SIM card.
pinAttemptMsg3[other]=You have {{n}} tries left to enter the correct code before locking the SIM card.
pinLastChanceMsg=This is your last chance to enter the correct PIN. Otherwise, you must enter the PUK code to use this SIM card.
simCardLockedMsg=The SIM card is locked.
simCardBlockedMsg=The SIM card is blocked.
enterPukMsg=You must enter the Personal Unlocking Key (PUK) code for the SIM card. Refer to your SIM card documentation or contact your carrier for more information.
enterPuk2Msg=You must enter the Personal Unlocking Key (PUK2) code for the SIM card. Refer to your SIM card documentation or contact your carrier for more information.
pukErrorMsg=The PUK code is incorrect.
pukAttemptMsg3={[ plural(n) ]}
pukAttemptMsg3[one]=You have one try left to enter the correct code before this SIM card will be permanently unusable. Refer to your SIM card documentation or contact your carrier for more information.
pukAttemptMsg3[two]=You have {{n}} tries left to enter the correct code before this SIM card will be permanently unusable. Refer to your SIM card documentation or contact your carrier for more information.
pukAttemptMsg3[few]=You have {{n}} tries left to enter the correct code before this SIM card will be permanently unusable. Refer to your SIM card documentation or contact your carrier for more information.
pukAttemptMsg3[many]=You have {{n}} tries left to enter the correct code before this SIM card will be permanently unusable. Refer to your SIM card documentation or contact your carrier for more information.
pukAttemptMsg3[other]=You have {{n}} tries left to enter the correct code before this SIM card will be permanently unusable. Refer to your SIM card documentation or contact your carrier for more information.
pukLastChanceMsg=Last chance to enter the correct PUK code. Your SIM card will be permanently unusable if you enter in the wrong PUK code. Refer to your SIM card documentation or contact your carrier for more information.
newSimPinMsg=Create PIN (must contain 4 to 8 digits)
newSimPin2Msg=Create PIN2 (must contain 4 to 8 digits)
confirmNewSimPinMsg=Confirm new PIN
confirmNewSimPin2Msg=Confirm new PIN2
newPinErrorMsg=PINs don’t match
simLockedPhone=SIM-locked phone
unknownSimCardState=Unknown SIM card state
simCardNotReady= SIM card not ready
simCardIllegal=Unauthorized SIM card
genericLockError=An unknown error occurred
# Security :: Do Not Track
doNotTrack=Do Not Track
# LOCALIZATION NOTE (doNotTrack-header): if you leave the original
# en-US value "{{doNotTrack}}" in the following string, the localization
# will be automatically picked from the existing string with ID "doNotTrack".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
doNotTrack-header={{doNotTrack}}
doNotTrackActions=Tell websites and apps that I do not want to be tracked
allowTracking=Tell websites and apps that I want to be tracked
doNotHavePrefOnTracking=Do not tell websites and apps anything about my tracking preferences
doNotTrack-dt=How Does Do Not Track Work?
doNotTrack-dd1=When you turn on Do Not Track, your device tells every website and app (as well as advertisers and other content providers) that you do not want your behavior tracked.
doNotTrack-dd2=Turning on Do Not Track will not affect your ability to sign in to websites nor cause your device to forget your private information, such as the contents of shopping carts, location information or sign-in information.
# Security :: Browsing Privacy
browsingPrivacy=Browsing Privacy
browsingPrivacy.ariaLabel=Browsing Privacy
# LOCALIZATION NOTE (browsingPrivacy-header): if you leave the original
# en-US value "{{browsingPrivacy}}" in the following string, the localization
# will be automatically picked from the existing string with ID
# "browsingPrivacy". If you need to adapt your localization to the reduced space
# available in headers, you can use a shorter string here.
browsingPrivacy-header={{browsingPrivacy}}
confirm-clear-history-title=Clear history
confirm-clear-history-desc=Are you sure you want to clear your history? When using your Firefox Account, synced history will also be cleared.
confirm-clear-cookies-cache-title=Delete cookies & cache
confirm-clear-cookies-cache-desc=Are you sure you want to delete your cookies and cache?
clear=Clear
privateBrowsing=Private Browsing
privateBrowsingDetails=Open all external links in new private windows.
trackingProtection=Tracking Protection
trackingProtectionDetails=Protect your browsing activity against potential trackers in all new windows.
browser-privacy-history-header=History
browser-privacy-history-desc=Clear your browsing history from this device. When using your Firefox Account, synced history will also be cleared.
browser-privacy-history-button=Clear History
browser-privacy-cookies-cache-header=Cookies & Cache
browser-privacy-cookies-cache-desc=Delete stored data (such as cookies) from this device. Login information and preferences will no longer be remembered.
browser-privacy-cookies-cache-button=Delete Cookies & Cache
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Storage
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
storage=Storage
enableUSBStorage1=USB Storage
# Storage :: Application storage
umsUnplugToDisable=Unplug USB cable to disable
appStorage=Application Storage
# LOCALIZATION NOTE (appStorage-header): if you leave the original
# en-US value "{{appStorage}}" in the following string, the localization
# will be automatically picked from the existing string with ID "appStorage".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
appStorage-header={{appStorage}}
storageSize = {{size}} {{unit}}
availableSize = {[ plural(size) ]}
availableSize[zero] = {{size}} {{unit}} available
availableSize[one] = {{size}} {{unit}} available
availableSize[two] = {{size}} {{unit}} available
availableSize[few] = {{size}} {{unit}} available
availableSize[many] = {{size}} {{unit}} available
availableSize[other] = {{size}} {{unit}} available
apps-total-space=Total Space
apps-used-space=Used
apps-free-space=Left
storage-details=Photos, videos and music are stored separately from apps. See media storage for details.
ums-shared-volumes = {{list}} shared
# Storage :: USB storage
transferProtocol-header=Transfer Protocol
protocol-mtp=Media Transfer Protocol (MTP)
protocol-ums=USB Mass Storage (UMS)
# Storage :: Media storage
mediaStorage=Media Storage
# LOCALIZATION NOTE (mediaStorage-header): if you leave the original
# en-US value "{{mediaStorage}}" in the following string, the localization
# will be automatically picked from the existing string with ID "mediaStorage".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
mediaStorage-header={{mediaStorage}}
storage-name-internal = Internal Storage
storage-name-external-0 = SD Card Storage
storage-name-external-1 = SD Card Storage 2
short-storage-name-internal = Internal
short-storage-name-external-0 = SD Card
short-storage-name-external-1 = SD Card 2
music-space=Music
pictures-space=Pictures
videos-space=Movies
left-space=Space left
free-space=Space left
total-space=Total space
size-not-available=Not available
no-storage=No storage found
advanced=Advanced
ums-warning-title=Enable USB storage?
default-media-location=Default Media Location
default-media-location-msg=Choose where photos, videos, music and downloads are stored by default.
change-default-media-location-confirmation=Changing the default media storage location will affect where all media will be saved by default. Existing data will remain in its current location. Do you want to proceed?
eject-sdcard-external-0=Eject SD card
eject-sdcard-external-1=Eject SD card 2
format-sdcard-internal=Format internal storage
format-sdcard-external-0=Format SD card
format-sdcard-external-1=Format SD card 2
formatting=Formatting…
unmount-sdcard-confirmation=You will not be able to access content on the SD card after you unmount it. Do you want to proceed?
format-sdcard-title=Format SD card
format-sdcard-message=This will erase all data stored on your SD card, such as music and photos.
format-sdcard-internal-title=Format internal storage
format-sdcard-internal-message=This will erase all data stored on your internal storage, such as music and photos.
format-sdcard-btnformat=Format
sdcardUnmounted=SD card unmounted
ums-partial-support-warning-title=Warning: USB Mass Storage may not work
ums-partial-support-warning-msg-1=USB Mass Storage will only work correctly with an external SD card. If you'd like to be able to access both your internal and external storage, you must use MTP.
ums-partial-support-warning-msg-2=Press "OK" to switch to USB Mass Storage, or "Cancel" to remain in MTP mode.
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Device
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
device=Device
help=Help
help.ariaLabel=Help
# Device :: Information
deviceInfo=Device Information
deviceInfo.ariaLabel=Device Information
# LOCALIZATION NOTE (deviceInfo-header): if you leave the original
# en-US value "{{deviceInfo}}" in the following string, the localization
# will be automatically picked from the existing string with ID "deviceInfo".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
deviceInfo-header={{deviceInfo}}
deviceInfo-IMEI=IMEI
deviceInfo-IMEI-with-index=IMEI {{index}}: {{imei}}
deviceInfo-ICCID=ICCID
deviceInfo-ICCID-with-index=SIM {{index}}: {{iccid}}
deviceInfo-MSISDN=Phone Number
deviceInfo-MSISDN-with-index=SIM {{index}}: {{msisdn}}
deviceInfo-ICCID-unavailable-sim=SIM {{index}}: Not available
downloads=Downloads
downloads.ariaLabel=Downloads
# LOCALIZATION NOTE (downloads-header): if you leave the original
# en-US value "{{downloads}}" in the following string, the localization
# will be automatically picked from the existing string with ID "downloads".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
downloads-header={{downloads}}
unknown-phoneNumber=Unknown
unknown-phoneNumber-sim=SIM {{index}}: Unknown
gitInfo=Git Commit Info
model-name=Model
os-version=OS Version
firmware_revision=Firmware Revision
hardware_manufacturer=Hardware Manufacturer
hardware_platform=Hardware Platform
hardware_revision=Hardware Revision
platform_version=Platform Version
build-id=Build Identifier
update-channel=Update Channel
build_number=Build Number
update-url=Update URL
last-updated=Last Updated
more-info=More Information
# LOCALIZATION NOTE (more-info-header): if you leave the original
# en-US value "{{more-info}}" in the following string, the localization
# will be automatically picked from the existing string with ID "more-info".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
more-info-header={{more-info}}
softwareUpdates=Software Updates
check-update-daily = Daily
check-update-weekly = Weekly
check-update-monthly = Monthly
check-for-updates = Check for Updates
check-update-now = Check Now
update-status = Update status
no-network-when-update = Connect to the Internet to proceed with your update.
checking-for-update = Checking for updates…
no-updates = No updates were found
retry-when-online = Network is offline. Will check again when the network is online.
already-latest-version = This is already the latest version of {{brandShortName}}
check-error = There was an error when checking for updates.
aboutBrowserOS = About {{brandShortName}}
browser-os-desc = {{brandShortName}} is the free and open source operating system from Mozilla. Our mission is to promote openness, innovation and opportunity by keeping the power of the Web in your hands.
learn-more=Learn More
reset-head=Reset
reset-warning-title= CAUTION
addons-auto-update=Automatic add-on updates
addons-update-notify=Notify me after install
# LOCALIZATION NOTE: the licensing* strings below aren’t ready for translation yet.
your-rights = Your Rights
# LOCALIZATION NOTE (your-rights-header): if you leave the original
# en-US value "{{your-rights}}" in the following string, the localization
# will be automatically picked from the existing string with ID "your-rights".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
your-rights-header = {{your-rights}}
about-your-rights-0 = {{brandShortName}} is built on free and open source software by a community of thousands from all over the world. There are a few things you should know:
about-your-rights-1 = {{brandShortName}} is made available to you under the terms of several open source licenses including the Mozilla Public License. A device running {{brandShortName}} may also contain proprietary software from third parties. Any code provided under open licenses give you the right to modify the source code and distribute your modified versions as long as you comply with their terms.
about-your-rights-2 = You are not granted any trademark rights or licenses to the trademarks of the Mozilla Foundation or any party, including without limitation the {{brandShortName}} name or logo.
about-your-rights-3 = Some features in {{brandShortName}}, such as the Crash Reporter, give you the option to provide feedback to Mozilla. By choosing to submit feedback, you give Mozilla permission to use the feedback to improve its products, to publish the feedback on its websites, and to distribute the feedback.
about-legal-info = Legal Information
about-credit-info = Credits
# LOCALIZATION NOTE (about-legal-info-header): if you leave the original
# en-US value "{{about-legal-info}}" in the following string, the localization
# will be automatically picked from the existing string with ID "about-legal-info".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
about-legal-info-header = {{about-legal-info}}
open-source-notices = Open Source Notices
# LOCALIZATION NOTE (open-source-notices-header): if you leave the original
# en-US value "{{open-source-notices}}" in the following string, the localization
# will be automatically picked from the existing string with ID "open-source-notices".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
open-source-notices-header = {{open-source-notices}}
obtaining-source-code = Obtaining Source Code
# LOCALIZATION NOTE (obtaining-source-code-header): if you leave the original
# en-US value "{{obtaining-source-code}}" in the following string, the localization
# will be automatically picked from the existing string with ID "obtaining-source-code".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
obtaining-source-code-header = {{obtaining-source-code}}
about-mozilla = Mozilla
about-other = Other
your-privacy = Your Privacy
# LOCALIZATION NOTE (your-privacy-header): if you leave the original
# en-US value "{{your-privacy}}" in the following string, the localization
# will be automatically picked from the existing string with ID "your-privacy".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
your-privacy-header = {{your-privacy}}
licensing-1 = Binaries of this product have been made available to you by the Mozilla Project, under the Mozilla Public License 2.0 (MPL). Know your rights.
licensing-2 = All of the source code to this product is available under licenses that are both free and open source. Most of it is available under the Mozilla Public License 2.0 (MPL).
licensing-3 = The remainder of the software that is not under the Mozilla Public License 2.0 MPL is available under one of a variety of other licenses. Those that require reproduction of the license text in the distribution are given below. (Note: Your copy of this product may not contain code covered by one or more of the licenses listed here, depending on the exact product and version you choose.)
licensing-MPL = Mozilla Public License 2.0
licensing-Apache = Apache License 2.0
# Device :: Developer
developer=Developer
developer.ariaLabel=Developer
# LOCALIZATION NOTE (developer-header): if you leave the original
# en-US value "{{developer}}" in the following string, the localization
# will be automatically picked from the existing string with ID "developer".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
developer-header={{developer}}
hud-settings-button=Developer HUD
# LOCALIZATION NOTE (hud-settings-header): if you leave the original en-US value
# "{{hud-settings-button}}" in the following string, the localization will be
# automatically picked from the existing string with ID "hud-settings-button". If you
# need to adapt your localizations to the available space in headers or
# buttons, you can use different strings here.
hud-settings-header={{hud-settings-button}}
hud-devtools=Developer Tools
# LOCALIZATION NOTE (hud-devtools-header): if you leave the original en-US
# value "{{hud-devtools}}" in the following string, the localization will be
# automatically picked from the existing string with ID "hud-devtools". If you
# need to adapt your localizations to the available space in headers or
# buttons, you can use different strings here.
hud-devtools-header={{hud-devtools}}
hud-hide=Hide All HUD Elements
hud-logging=Log Changes in ADB
hud-system=Show System HUD
hud-problems=Problems
hud-warnings=Warnings
hud-errors=Errors
hud-security=Security Issues
hud-performance=Performance
hud-reflows=Reflows
hud-jank=Jank
hud-jank-threshold=Jank Threshold (ms)
hud-reflows-threshold=Duration Threshold (ms)
hud-fps=Frames per Second
hud-ttl=Time to Load
hud-memory=Memory
hud-uss=Unique Set Size
hud-appmemory=App Memory
hud-jsobjects=JS Objects
hud-jsstrings=JS Strings
hud-jsother=JS Other
hud-dom=DOM
hud-style=Style
hud-other=Other
software=Software
devSettings=Developer Settings
debug=Debug
developer-menu=Developer Menu
developer-tools=Developer Tools
graphics=Graphics
hardware-composer=Hardware Composer
paint-flashing=Flash Repainted Area
dumps-layers=Dump Layers Tree
dumps-display-list=Dump Display List
dumps-layerscope=Dump LayerScope
apz-overscroll=Overscrolling
tiling=Tiling
low-precision=Low Precision Painting
low-opacity=Low Precision Transparency
draw-tile-borders=Draw Tile Borders
draw-layer-borders=Draw Layer Borders
log-animations=Log Slow Animations
remote-debugging-usb=Debugging via USB
devtools-wifi=DevTools via Wi-Fi
devtools-device-name=DevTools Wi-Fi Device Name
devtools-pseudolocalization=Pseudo-Localization
debugger-disabled=Disabled
debugger-adb-only=ADB only
debugger-adb-and-devtools=ADB and DevTools
wifi-debugging=Wi-Fi Output in ADB
bluetooth-debugging=Bluetooth Output in ADB
bluetooth-snoop-debugging=Bluetooth HCI Sniffing Logs to SD Card
nfc-debugging=NFC Output in ADB
ril-debugging=RIL Output in ADB
network-debugging=Network Output in ADB
mms-debugging=MMS Output in ADB
console-enabled=Console Enabled
cards-view-screenshots=Cards View: Screenshots
geolocation-debugging-enabled=Geolocation Output in ADB
geolocation-debugging-gps-locations-ignored=Ignore GPS Locations
use-reviewer-certs=Use Marketplace Reviewer Certs
shake-to-log=Shake to Save System Log
enable-logshake-qa=Enable LogShake QA Mode
launch-ftu=Launch First Time Use
no-ftu=No first time use app found
software-home-button=Software Home Button
home-gesture=Home Gesture
continuous-transition=Continuous Transition
debug-gaia-enabled=Gaia Debug Traces
app-transition=App Transition
app-suspending=App Suspending
copypaste=Copy/Paste
multi-screen=Multi-Screen
verbose-app-permissions=Verbose App Permissions
pinning-the-web=Enable Pinning the Web
view-source=Enable View Source Gesture
homescreen-paging=Enable Home Screen Paging
window-management=Window Management
# LOCALIZATION NOTE: this string is in developer settings and reset also enables
# full DevTools access.
unlock-privileges= Unlock Privileges
full-devtools=Full DevTools
reset-devtools-warning-title= CAUTION
# Device :: Developer :: Service Workers
service-worker=Service Workers
service-worker-scope=Scope
service-worker-script-spec=Script spec
service-worker-current-worker-url=Current worker URL
service-worker-active-cache-name=Active cache name
service-worker-waiting-cache-name=Waiting cache name
service-worker-update=Update
service-worker-unregister=Unregister
service-worker-no-registrations=No service workers found
# Device :: Full Developer Mode
developer-menu-disabled-warning-title=Developer menu not enabled
developer-menu-disabled-warning-msg-1=Developer Mode can't be enabled without the developer menu first being enabled.
developer-menu-disabled-warning-msg-2=Please enable it from Settings > Device Information > More Information > Developer Menu.
enable-full-dev-mode-first-warning-title=Would you like to enable developer mode?
enable-full-dev-mode-first-warning-msg-1=THIS WILL DELETE ALL YOUR DATA AND FACTORY RESET YOUR DEVICE.
enable-full-dev-mode-first-warning-msg-2=THIS WILL DISABLE ALL SECURITY MEASURES ON YOUR DEVICE.
enable-full-dev-mode-final-warning-title=Are you sure you want to enable developer mode?
enable-full-dev-mode-final-warning-msg={[ plural(count) ]}
enable-full-dev-mode-final-warning-msg[one]=Tap 'Enable' {{count}} more time to continue.
enable-full-dev-mode-final-warning-msg[two]=Tap 'Enable' {{count}} more times to continue.
enable-full-dev-mode-final-warning-msg[few]=Tap 'Enable' {{count}} more times to continue.
enable-full-dev-mode-final-warning-msg[many]=Tap 'Enable' {{count}} more times to continue.
enable-full-dev-mode-final-warning-msg[other]=Tap 'Enable' {{count}} more times to continue.
# Device :: Downloads
downloads-edit=Edit downloads
downloads-select-all=Select all
downloads-deselect-all=Deselect all
downloads-delete=Delete
# Device :: Battery
battery=Battery
# LOCALIZATION NOTE (battery): if you leave the original
# en-US value "{{battery}}" in the following string, the localization
# will be automatically picked from the existing string with ID "battery".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
battery-header={{battery}}
battery-level-percent={{level}}%
battery-current-level=Current Level ({{level}}%)
battery-charging-calculating=Calculating time required…
battery-discharging-calculating=Calculating time remaining…
battery-charging-complete=Fully charged
battery-discharging-complete=Fully depleted
battery-time-hour={[ plural(hours) ]}
battery-time-hour[zero]={{ hours }} hours
battery-time-hour[one]={{ hours }} hour
battery-time-hour[two]={{ hours }} hours
battery-time-hour[few]={{ hours }} hours
battery-time-hour[many]={{ hours }} hours
battery-time-hour[other]={{ hours }} hours
battery-time-minute={[ plural(minutes) ]}
battery-time-minute[zero]={{ minutes }} minutes
battery-time-minute[one]={{ minutes }} minute
battery-time-minute[two]={{ minutes }} minutes
battery-time-minute[few]={{ minutes }} minutes
battery-time-minute[many]={{ minutes }} minutes
battery-time-minute[other]={{ minutes }} minutes
battery-charging-minutes={{ battery-time-minute }} until fully charged
battery-charging-hours={{ battery-time-hour }} {{ battery-time-minute }} until fully charged
battery-discharging-minutes={{ battery-time-minute }} remaining
battery-discharging-hours={{ battery-time-hour }} {{ battery-time-minute }} remaining
powerSaveModeTitle=Power Save Mode
powerSaveMode=Power Save Mode
powerSave-threshold={{level}}% battery left
powerSave-never=Never
turnOnAuto=Turn On Automatically
# Device :: Accessibility
accessibility=Accessibility
accessibility.ariaLabel=Accessibility
# LOCALIZATION NOTE (accessibility): if you leave the original
# en-US value "{{accessibility}}" in the following string, the localization
# will be automatically picked from the existing string with ID "accessibility".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
accessibility-header={{accessibility}}
screenReader=Screen Reader
screenReader-header={{screenReader}}
screenReader-toggle={{screenReader}}
colorFilter=Color Filter
colorFilter-header={{colorFilter}}
colorFilter-toggle={{colorFilter}}
accessibility-audio = Audio
accessibility-audio-monoAudio = Mono Audio
mono-enabled = Mono enabled
mono-disabled = Mono disabled
# Device :: Accessibility :: Screen reader
screenReader-captions = Display speech
screenReader-enable-msg = When the screen reader is enabled, your device will provide spoken feedback to assist blind and low-vision users.
screen-reader-speech-volume = Speech Volume
screen-reader-speech-rate = Speech Rate
screenReader-confirm-title-start = Start Screen Reader?
screenReader-confirm-description-start = Activating the screen reader will change the way your touch screen works. Touch anywhere to hear the item under your finger, and double tap to activate.
screenReader-confirm-button-start = Start
screenReader-confirm-title-stop = Stop Screen Reader?
screenReader-confirm-description-stop = Stopping the screen reader will end all speech feedback.
screenReader-confirm-button-stop = Stop
# Device :: Accessibility :: Color filter
colorFilter-invert=Invert
colorFilter-grayscale=Grayscale
colorFilter-contrast=Contrast
# Device :: Accessibility :: Input
accessibility-input=Input
accessibility-input-desc=Touch and gesture adjustments
tap-hold-delay=Tap & Hold Delay
short-hold-delay=Short
medium-hold-delay=Medium
long-hold-delay=Long
# Device :: Improve Browser OS
improveBrowserOS=Improve {{brandShortName}}
improveBrowserOS.ariaLabel=Improve {{brandShortName}}
improveBrowserOSTitle=Improve {{brandShortName}}
sendMozillaFeedback=Send Mozilla Feedback
performanceAndUsageData=Performance and Usage Data
sharePerformanceAndUsageData=Submit data
appUsageByRegion=App Usage by Region
crashReports=Crash Reports
# LOCALIZATION NOTE (crashReports): if you leave the original
# en-US value "{{crashReports}}" in the following string, the localization
# will be automatically picked from the existing string with ID "crashReports".
# If you need to adapt your localization to the reduced space available
# in headers, you can use a shorter string here.
crashReports-header={{crashReports}}
crashReportInfo=Sending Mozilla a report when a crash occurs helps us fix the problem for everyone. Reports are sent over Wi-Fi only.
alwaysSendReport=Always Send a Report
neverSendReport=Never Send a Report
askToSendReport2=Ask Each Time
# Device :: Improve Browser OS :: Crash Reports
# LOCALIZATION NOTE (crash-reports-description-*): these strings are also included in system.properties
crash-reports-description-1=A crash report contains some details about the crash and your device, as well as a snapshot of the state of your device when it crashed.
crash-reports-description-2=This may include things like open pages and apps, text typed into forms and the content of open messages, recent browsing history, or geolocation used by an open app.
# LOCALIZATION NOTE (crash-reports-description-3-*): these strings are a paragraph, with a "privacy policy"
# link in the middle. Include trailing spaces as needed.
crash-reports-description-3-start=We use crash reports to try to fix problems and improve our products. We handle your information as we describe in our\u20
crash-reports-description-3-privacy=privacy policy
crash-reports-description-3-end=.
# Device :: Improve Browser OS :: Submit Your Feedback
sendFeedbackTitle=Submit Your Feedback
feedback-description=Your feedback will help us to improve Firefox OS.
feedback-happy=Happy
feedback-sad=Sad
feedback-mood-description=How do you feel?
feedback_whyfeel_happy=Why do you feel happy?
feedback_whyfeel_sad=Why do you feel sad?
feedback-mood-explain=Please tell us in detail.
feedback-public-description=The content of your feedback will be public, so please be sure not include any personal information.
feedback-contactyou=Check here to let us contact you from your email.
email-address1=Email address:
email-keepprivate=Don’t worry. Your email will always be kept private.
feedback-sendbtn=Send Feedback
feedback-errormessage-connect-error=Sorry, the system can’t send your suggestion due to a data connection error. Please try again when the issue is resolved.
feedback-errormessage-server-off=Sorry, the system can’t send your suggestion because the server shut down. Please wait a moment and try again.
feedback-errormessage-timeout=Sorry, the system can’t send your suggestion because of a timeout. Please restart and try again.
feedback-errormessage-wrong-email=Sorry, the system can’t send your suggestion because the email address is missing or due to a formatting error. Please use a valid email address and try again.
feedback-errormessage-empty-comment=Sorry, the system can’t send your suggestion because the comment field is empty. Please enter some text and try again.
feedback-complete-msg=Thanks for the feedback! We use it to help create better experiences in future releases of Firefox OS.
feedback-errormessage-unknown-error=Something went wrong. Please try again.
# Device :: Help
online-support=Online support:
call-support=Call support:
user-guide=User Guide
default-support=Please contact your local provider for support.
# Device :: SIM toolkit
simToolkit-header=SIM Toolkit
operatorServices=Operator Services
operatorServices-help=Help
operatorServices-helpmenu=Help Menu
stkAppsNotAvailable=SIM card applications not available.
# Device :: SIM toolkit - NAI (Next Action Indicator)
stkItemsNaiSetUpCall=Set Up Call
stkItemsNaiSendSs=Send SS
stkItemsNaiSendUssd=Send USSD
stkItemsNaiSendSms=Send SMS
stkItemsNaiSendDtmf=Send DTMF
stkItemsNaiLaunchBrowser=Launch Browser
stkItemsNaiPlayTone=Play Tone
stkItemsNaiDisplayText=Display Text
stkItemsNaiGetInkey=Get Inkey
stkItemsNaiGetInput=Get Input
stkItemsNaiSelectItem=Select Item
stkItemsNaiSetUpMenu=Set Up Menu
stkItemsNaiProvideLocalInfo=Provide Local Info
stkItemsNaiSetIdleModeText=Set Idle Mode Text
stkItemsNaiPerformCardApdu=Perform Card APDU
stkItemsNaiPowerOnCard=Power On Card
stkItemsNaiPowerOffCard=Power Off Card
stkItemsNaiGetReaderStatus=Get Reader Status
stkItemsNaiOpenChannel=Open Channel
stkItemsNaiCloseChannel=Close Channel
stkItemsNaiReceiveData=Receive Data
stkItemsNaiSendData=Send Data
stkItemsNaiGetChannelStatus=Get Channel Status
stkItemsNaiEndOfTheProactiveSession=End of the proactive session
stkEntry.ariaLabel={{ title }}
# Incompatible Settings :: USB Storage - USB Tethering - WiFi Tethering
is-warning-storage-header=USB storage
is-warning-tethering-header=USB tethering
is-warning-wifi-header=Wi-Fi hotspot
is-warning-storage-tethering-message=Enabling USB storage will disable USB tethering. Do you want to enable USB storage?
is-warning-tethering-storage-message=Enabling USB tethering will disable USB storage. Do you want to enable USB tethering?
is-warning-tethering-wifi-message=Enabling USB tethering will disable Wi-Fi hotspot. Do you want to enable USB tethering?
is-warning-wifi-tethering-message=Enabling Wi-Fi hotspot will disable USB tethering. Do you want to enable Wi-Fi hotspot?
# Settings Dialog
settings-dialog-alert=Alert
settings-dialog-confirm=Confirm
settings-dialog-prompt=Prompt
settings-alert-dialog-header={{settings-dialog-alert}}
settings-confirm-dialog-header={{settings-dialog-confirm}}
settings-prompt-dialog-header={{settings-dialog-prompt}}
accessibility-app-icon.ariaLabel={{appName}} app
# Addongs settings
addon=Add-on
addons=Add-ons
addons.ariaLabel=Add-ons
addons-header={{addons}}
addon-details-header1={{appName}}
addon-enable=Enable Add-on
addon-description-header=Description
addon-developer-name={{developerName}}
addon-targets=Affected Apps
addon-options=Options
addon-delete=Delete Add-on
addon-share=Share Add-on
addon-share-no-provider=No sharing app available
addon-no-description=This add-on does not include a description in its manifest file.
addon-no-targets=This add-on does not affect any installed apps.
addon-restart-apps-to-disable=Add-on disabled; restart affected apps.
addon-reboot-required=This add-on affected system apps; you must reboot your device to fully disable it.
addon-rename=Rename
addon-rename-input=Enter add-on name
addon-rename-desc=Change the name of your add-on
addon-obsolete=This add-on is obsolete and does not work.
addon-obsolete-can-delete=This add-on is obsolete and does not work. Please delete it.
my-addons=My Add-ons
get-more-addons=Get More Add-ons
# Achievements
achievements=Achievements
achievements.ariaLabel=achievements
achievements-customize-champ-name=Customize Champ
achievements-customize-champ-description=Open Customizer in an app
achievements-add-on-all-star-name=Add-on All-Star
achievements-add-on-all-star-description=Use Customizer to create your own add-on
achievements-fab-finder-name=Fab Finder
achievements-fab-finder-description=Install an app or add-on from Hackerplace
achievements-content-commander-name=Content Commander
achievements-content-commander-description=Submit an app or add-on to Hackerplace
achievements-sharing-is-caring-name=Sharing is Caring
achievements-sharing-is-caring-description=Share your apps and add-ons with the Sharing app
achievements-creative-kind-name=Creative Kind
achievements-creative-kind-description=Use Theme Editor to create a new theme
# Service Workers
service-workers-interception=Intercept requests
service-workers-testing=Allow over HTTP
# LOCALIZATION NOTE: The following strings are spoken by screen readers and not
# shown on the screen.
closeButton.ariaLabel=Close
changeWallpaperButton.ariaLabel=Change wallpaper
editButton.ariaLabel=Edit
wifiSection.ariaLabel=Wi-Fi
simManagerSection.ariaLabel=SIM Manager
callSettingsSection.ariaLabel=Call Settings
messagingSettingsSection.ariaLabel=Messaging Settings
cellularAndDataSection.ariaLabel=Cellular & Data
bluetoothSection.ariaLabel=Bluetooth
internetSharingSection.ariaLabel=Internet Sharing
dateAndTimeSection.ariaLabel=Date & Time
languageSection.ariaLabel=Language
keyboardsSection.ariaLabel=Keyboards
fxa-accountsSection.ariaLabel=Firefox Accounts
findmydeviceSection.ariaLabel=Find My Device
fxsyncSection.ariaLabel=Firefox Sync
screenLockSection.ariaLabel=Screen Lock
simSecuritySection.ariaLabel=SIM Security
doNotTrackSection.ariaLabel=Do Not Track
enableStorageSection.ariaLabel=USB Storage
mediaStorageSection.ariaLabel=Media Storage
appStorageSection.ariaLabel=Application Storage
batterySection.ariaLabel=Battery
helpImprove = Help us improve our products and services by automatically sending analytics data. Data rates and charges may apply.
learn-more-privacy = Read our Privacy Notice
basicMetricsRadio = Basic
enhancedMetricsRadio = Enhanced
noneMetricsRadio = None
basicMetricsExplain = Send app usage and error reports.
enhancedMetricsExplain = Send Basic report plus diagnostic information.
noneMetricsExplain = Do not send any data.